Power Controllers

Thyristorised Power Controllers W5-Series-SIPIN-SCR

Product Details:
  • Type: Automatic, Semi-Automatic
  • Minimum Order Quantity: 1 Piece

Product Features:

  • Independent adjustment of Max and BIAS
  • Down-opened Panel, easy for fuse replacement
  • VR of Max and SFS are installed in the front panel, easy for adjustment
  • Multi-LED display panel makes the operating condition clear
  • The auxiliary powers (AC1, AC2) are independently controlled for all models
  • Build-in buffering output adjustment (SFS VR), adjusting range 1~22 seconds. (Only for the phase control product)
  • Top & bottom shielding covers are designed for safety and fashion out looking, also easy for wiring installation
  • In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse burn-down
  • Main power is one spec. Design for 200~480VAC
  • Automatic power frequency detection for 50~60 Hz. No need for selection or switch
  • Automatic detection and display for power out-of-phase, SCR overheating, and fuse burn-down with one set of alarm dry contact output
  • In cases of SCR overheating or fuse burn-down, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse burn-down
  • 4~20mA, 1~5VDC, 2~10VDC, 0~20mA, 0~5 VDC, 0~10VDC, dry contact points, etc. and all control signals are ready to use
  • Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions
  • Using European detachable control signal connector for easy replacement without re-wiring installation

Other Information:

  • Minimum Order Quantity: 1 Piece

Additional Information:
  • Item Code: W5-Series-SIPIN-SCR

Single Phase SCR Power Controllers SP-Series

Product Details:
  • Digit Display Size: Single
  • Model: SP Series
  • Minimum Order Quantity: 1 Piece

SP Series Single Phase Power Regulator

  • S series with ingenious design, no need of auxillary source, easy wiring
  • Special design DIN35 Channel mountiing, easy for installation, dismantling, moving
  • Double SCR design, high withstanding voltage, high withstanding current, no electrical interference
  • Stop output in case of over temperature that is for protecting SCR and instruction function
  • Big cooling area, sufficient capacity
  • Single speciation design with wide useful range from 24VAC to 480VAC

Other Information:

  • Minimum Order Quantity: 1 Piece

Additional Information:
  • Item Code: SP-Series
Looking for Power Controllers ?
Share Us:
© Shah Enterprise
Desktop Site Back to top